Glencroft Table and Scratch Build Progress

I have been spread between two houses today.  I started with a table for the Glencroft to sit on - just to get it off the floor if nothing else.  The kitten had far too easy access to the house while it was on ground level.  The table has some work left on it obviously, I'm going to dress up the table top a bit - I struggled to keep the design somewhat simple to go with the "basic" style of the house.

The centre of the table top was cut out so the wiring and fuses are still accessible.  The benefit to the table is that I can now do some landscaping!  The house oddly doesn't seem nearly as big now that it's elevated.

On my scratch build, it was a two steps back day - I had to knock down the walls I had up and rip the base in half.  I cut / added a 5 inch spacer to give a bit more room to the hallway and living room. Now I play the waiting game until the glue has fully set.

Scratch build - Day 4

Dear readers I am ashamed to say that in my haste to build this next house I ignored two cardinal rules.  The first of these rules was "measure twice, cut once" - the second, and possibly the most important - dry fit.  With my front walls glued firmly in place I came to realize that the measurements on my hallway were all wrong.  Nothing about these measurements was at all correct.  Had i completed my foam core dryfit I would have realized this.

My hallway was supposed to be 7.5" wide, this allowed room for the stair kit I have which is 2.5" wide.  I'm not sure why something didn't trigger when I realized that my double door kit was too wide - regardless my beloved front wall had to come off tonight and now I have to figure out how to cut my base without taking down all the other glued and nailed walls so that I can add a spacer of three inches.

I wrestled with putting a "tower" on the back of the house but in the end I knew that I wanted to have visibility of the hallway, and if it was only 4" across it wouldn't be very impressive at all.  Two steps forward and one step back it seems!

I will have further news once I figure out the best way to cut my base!

Scratch build - Days 1 -- 3

 Now that I've had some practice on three kit builds I have decided it's time to put that humongous bundle of windows and doors to good use and make my own house from scratch.  To the right is my inspiration photo from a set of blueprints dated in the early 1900's.

I have no idea how I'm going to do the roof on the tower yet, or how to tackle the bay windows (mainly because I have to fashion my existing windows into skinnier versions of themselves) but I will cross that bridge when I get to it.

Day 1 was spent making a pattern out of foam core in an attempt to conceptualize the house.  Now that I'm in the middle of the build however all this has gone out the window - at this point I find myself winging it and I have no idea where to put the stairs!  There have been a couple of points where I found myself longing for a kit build so I could feel like I was making some progress - but today I got a table saw and it's sped things up considerably - I am now making straight cuts and not spending hours sanding the wood down to square up corners.

Access to the two "tower" rooms will be from a side opening much like in the Lily kit.  If I get truly adventurous / confident I will hinge a wall there so when the lights are on it doesn't cast strange light all over the place.

So far I think it's managed to avoid making "a box with windows" - that's the one type of little house I can't stand.  I'm not sure what it is about them that drives me mental - maybe because I think anyone can build a box.  I love the Greenleaf kits because none of them, even the colonials, have such a boxy look.