Another Scratch Build - Day 3

Well an update to my Georgian townhouse project.  I sat down with it today for the first time in what seems like months, but I'm fairly certain is only weeks - if not just one week... regardless, far too long.  We've had a lot of rain the last two weeks, and that humidity has taken its toll on my plywood.  All the walls, including the front opening facade, have warped.  It made it quite a challenge to build up the box structure for this house, and I'm not entirely sure what to do with the front halves of the house.  There must be a way to flatten them back out, and I will find it.



This afternoon I dremeled out the channels for my wiring and, as previously mentioned, assembled the box structure.  I'm torn on how to tackle the entry way, I would like paneling but I don't think it would look right with the crisp white interior doors.  I also haven't decided on how to paper the interior, and until I decide that I can't build the frame that the hinges will attach to.  So many directions to go when you don't have an instruction sheet guiding your every step!

I did however decide on a colour for the front door, it will be quite red with brass fittings.  I even have a mail slot here somewhere in this crap-room to put on the front of it.  I also started working on the staircase but then ran out of the triangle wood I'm using for the steps, so tomorrow I guess I will have to go to the hobby shop along with the gym.  Luckily they are right beside each other.

I'm still not 100% sure how to attach the hinges to the front panels yet, I may have to thicken up / reinforce / flatten the front panels with columns of some sort so the screws have something to bite into, and that may be enough to take the warp out of the panels so they fit together again.  There is also the front garden to assemble, that may just do the trick too.

Every door should be red in my opinion

I'm finding the directions in this book don't make sense until you just sit down and do it, then looking back after several choice utterances, it makes perfect sense and you don't really realize where the last four hours of your life went.  I suppose it's just the way the English phrase their sentences - helps I've been Americanized!

Another Scratch Build

After some soul searching, and finally admitting I'm in a touch over my head with my first scratch-build, I decided that perhaps it would be prudent to start with something a touch more ... basic until my long unused carpentry skills are sharpened.

I had ordered a few books off Amazon.ca weeks back, and they're filled with projects that are primarily done in the European style (front opening) rather than the North American open backed style.  I've never really been fond of these, they tend to look like boxes with windows, and I'm still wrestling with that - unaided by the fact that I do literally have a 24 x 17 box that I'm currently cutting window holes into.

The project I chose as a learning exercise is the second project in the book, a seven room Georgian townhouse with faux basement.  Although seven sounds mighty large, three of the rooms are located in the attic and at best guess will be too small to function as much other than a bathroom.  I didn't realize the depth of the house until I was dry fitting the panels together, this thing is ridiculously deep and seems to not be making efficient use of space.

The author's goal with this project was to build a "home of a well-to-do family and that the rooms should be large enough to fit quite a few impressive pieces of furniture...".  Fair enough I say, but when you have a 17 x 10 dining room and not a thing to put into it, plus you have to walk upstairs to find a sofa to plunk your tiny butt on after eating, that just seems ridiculous (I currently live in a townhouse - not georgian - and it's nothing but stairs, this is a serious consideration in my mind).

Now that I have the panels cut, I don't want to go putting access doors everywhere on my very sturdy box, so I am tossing around ideas for a visual division of the ground floor room so it can be both salon and dining room.  My first attempt is pictured, the second option will be pillars .  I like that the division travels across the ceiling but I don't think I'm entirely sold on this idea yet either.

Yesterday I started with the base.  The one thing I do like about the front-opening style is that the structure is incredibly sound.  This is the first house that hasn't creaked when I pick it up - in fact there's no give to this thing at all.  Constructed out of 1/4" pine plywood it should stay relatively stable through the years.  The base tucks in between the exterior walls, and has a 1.5" recess at the front where I plan on putting my electrical panel for ease of access.

If anyone has built anything out of this book I'd love to hear your thoughts on the process.  I find I'm having difficulty following the instructions and images provided, they seem out of order somehow, and the author comes across as smug somehow (this is the only true way to do something or other...), but his designs are quite sharp.  The book is "Making Georgian Dolls' Houses" by Derek Rowbottom.  If you see a copy around definitely thumb through it!

Day 2 - Beacon HIll

After a week of procrastination I decided it was high time to tackle the 2nd floor staircase, which of course meant tackling the wallpapering as well.

The second floor is a much plainer room, less room for furnishings and only one light, it couldn't handle the floral wallpaper of the ground floor.  I opted for a stylized yet relatively simple fabric which was again mod-podge'd onto the walls.  I will be able to carry the single square around to the front wall, which means I only have to match one seam on this wall (score!)

Before the front wall goes on I also decided it would be a good idea to get the flooring started as my head doesn't fit in this house what-so-ever.  I'm going with coffee stirrers again, I liked the grain that comes out when you stain them, they are fairly cheap, and you can say it's real hardwood that's been installed!

The flooring is possibly my favourite tedious part of a house, it's just mindless enough that you can watch TV or listen to the radio while doing it, but not so tedious that your hands cramp and eyes cross after the first ten minutes. I may find it so easy solely because of my easy-cutter, I really can't imagine doing it without.

Beacon Hill - The beginning

I finally have a measurable amount of work done on the Beacon hill kit that arrived a few weeks back.  I can tell already this is a very persnickity build.  The two sub-assemblies went together rather easily, the stairs are complicated but all in all I can't say they were terribly difficult.  However getting the stairs into the sub-assemblies.. well that's a different story!

As I'm not one to build and then decorate, most of the work has been determining where lighting will go, how I will conceal it, and then figuring out the priority in which to get the paper on the wall and the paint on the ceiling!

I went with a floral fabric for the hall/dining room paper.  It's bold, but I am still reasonably convinced I can pull this off.  It lends an over the top victorian aspect to the staircase, and I'm sure that once the room is filled with dark furnishings it will be toned down considerably.

For some reason the photos always make the paper more yellow than it actually is, the background on this fabric is cream, not yellow - but you get the idea :)

As far as the exterior goes, I've been waffling between two styles of masonry, but I think I have finally decided to go with the red brick.  Every BH I've seen (with the exception of one) has had siding, so I want to avoid that at all costs.  So here is my inspiration photo, lol and I'm about to learn a lot about bricking in minature!

Scratch build - day 6

I finally got my newel posts up.  I had bought some a while ago but they got lost in my craft mess, decided after three days of searching for them it actually would make more sense to just go buy new ones!

Tomorrow, with any luck, I will be able to install the railing and balusters.  some trim work on the side of the staircase (I haven't decided how to treat the sides yet) and I will start staining these bad boys.  It's such a relief to feel like I'm doing something on this house again.

Scratch build - Day 4

Dear readers I am ashamed to say that in my haste to build this next house I ignored two cardinal rules.  The first of these rules was "measure twice, cut once" - the second, and possibly the most important - dry fit.  With my front walls glued firmly in place I came to realize that the measurements on my hallway were all wrong.  Nothing about these measurements was at all correct.  Had i completed my foam core dryfit I would have realized this.

My hallway was supposed to be 7.5" wide, this allowed room for the stair kit I have which is 2.5" wide.  I'm not sure why something didn't trigger when I realized that my double door kit was too wide - regardless my beloved front wall had to come off tonight and now I have to figure out how to cut my base without taking down all the other glued and nailed walls so that I can add a spacer of three inches.

I wrestled with putting a "tower" on the back of the house but in the end I knew that I wanted to have visibility of the hallway, and if it was only 4" across it wouldn't be very impressive at all.  Two steps forward and one step back it seems!

I will have further news once I figure out the best way to cut my base!

A House in 22 days - Day 13 - Christmas Eve Eve

 The elves are thoroughly whipped and the house is thoroughly done!  The house wasn't quite 22 days, we actually did it in 13... with an average of 10 hours per day... each... so 260 hours all said and done.  I feel like I've run the Boston marathon!

The final trim bits have been glued in place, the paperclay is done on the chimney, and the cap is on (not pictured).  Ben and I came close to killing each other only once during the whole process which is pretty damn good if I do say so myself.

Things I would have done differently on this build - more time.  I hate a rush build, I like to agonize over placement of everything, this is a hobby that definitely appeals to my OCD tendencies.  I would have used a saw to cut the siding rather than a utility knife to get cleaner edges, and I would have added plexi glass to the sunroom rather than the GL plastic window.  I definitely wish we had taken the few extra hours to electrify the house.  I wouldn't use the wooden shingles again, I would go with paper clay and simulated the terra cotta shngles.

 Things I love about this house, I love the front entrance bash.  As much as some light was lost taking out the floor to ceiling windows I think the functioning doors and steps / planters more than make up for it.  The pink is growing on me, at first I really hated it but as everything came together I think it actually suits the house pretty well.

I really like the lay out of the kit, it's different than your standard four room box, I'm quite pleased with the stairway and we're already planning on getting some appliances for a kitchen set and finding a smaller dining room table for the "dining hall" (blue room).

I will actually be sad to see this house go in spite of my aggression towards it earlier today when I thought it might not be done in time for christmas :)

A House in 22 days - Day 10 & 11

Day 10 was siding and stonework.  Ben tackled the MDF siding boards while I slaved away at the pasta machine.  After the clay was secured to the wall I wet it down and scrubbed the pieces of clay together.  The slick surface is easier to work with I find - and often spritz it with a plant mister to keep things moist.  The lines were pressed in with the lever on a set of nail clippers, and then the wet clay drug back up over to create raised edges / texture.

The MDF siding appears to be extremely difficult to cut, I have to say I'm quite glad i'm not working with it :)

 The sunroom tip out has been a quandary - I really didn't know how to approach this one.  I had cut out a room sized rectangle of foamcore and was prepared to do the floor on this to keep it all on one level.  This involved bringing the paper clay foundation up higher however as the foamcore was visible through the windows.  In the end I used the foamcore as a pattern for a lino tile.  I then finished off the ledge between rooms with thin slices of lino tile.


The paper clay foundation was then ready to go on, I really like the look it gives to the sunroom, it makes it look more substantial!











The paper clay stone work which went on in day 10 was painted today with layers of watercolour paints.  I filled in the lines between the stones first and then applied different layers of yellow, brown, and grey over top.

 The next segment of paper clay to be done is the front entrance.  I have glued together the planters which came with the kit (pardon the tape) - the plan is to paperclay the planters and steps into one piece which can then be glued to the deck

I really wish we had electrified this house, I think it would be one of the neater ones to see lit up!  With 2 days to go until christmas, I'm beginning to think we just may make it (as you can see the roof is going up currently)

A House in 22 Days - Day 7 & 8

I have to say this kit goes together pretty darned easy, I haven't had near the fight with it I did with the Chantilly and Glencroft.  After pulling 14 hour days on Saturday and Sunday, I can see the light at the end of the tunnel.

The floors are down and the walls are up.  The two wings have been glued into place (this house is freaking huge) and the roof should be going on today.  The house was reinforced with corner moulding on the corners and the siding will be fitted between.  The only thing i'm not happy with is the ladder to the loft - I don't like the look of it.  I don't think I will have time to build a new ladder however.

 We also started the furniture from a Greenleaf kit as a hold over until better pieces can be found - at least christmas shopping will be easier for H for the next couple of years!

The only downfall I see to these kits is the room sizes are so strange, they are either far too big or uselessly small.  I really can't wait to start a scratch build so everything is exactly how I want it - as you can see the temporary occupant feels the same way!

A House in 22 Days - Day 6

Naturally, as tends to happen, when you have a short time frame a million things come up which eat into your time.  I got shipped off for a conference this week and last week there was a rash of people quitting!  It's now December 17th at 12:30 am and the panic is settling in firmly.  The walls are starting to go up but there's still a solarium to build, wood to be stained and windows to install!

Overall, it looks like a bit of progress is being made, that is the benefit to blogging - you can see how far you've come!  In addition to what's in the photo, i have the front door stained, baseboards are drying, and the glue is setting on all the major parts of the structure.  Tomorrow the mantles will go in and the remaining outer walls will be complete before lunch - then I start on the solarium while Ben tackles the kitchen (bathroom "tip out" in the kit).  The plan is to use the left room as a dining area if we can ever find a set for his niece.

The lino tiles are holding up well to the twisting that comes with construction, and the spackle grout hasn't chipped at all which is rather surprising.  As you can see I have the wall braced with scrap wood and a small box, four clamps, tape, and positive thoughts!

The fireplace mantles are stained and will be ready to go in tomorrow.  We picked up some beads at Walmart tonight to make a sculpture to hang over the mantle, as well as a sun plaque to hang on the other side of the chimney to break up the white a bit.  The trim work has been cut/stained and should be able to go in tomorrow as well.

A House in 22 Days - Day 3

Nothing exciting to post on day 2, and then we took a day off lol.  So Day 3, the TP stucco on the chimney is done and the core structure has been firmly glued to the base.  The kitten has knocked my can of latex white off the shelf, so the majority of that was soaked into the carpet by the time I discovered an accident had befallen my new gallon of paint.  As a result the stucco was done with ceiling paint this go around, and I think it's better!  It covered well and dried quickly.  This has been noted for the next round of stucco!

The wallpaper is fabric mod-podged on to the wood.  Ben wanted very girly colours for the house, and they seem quite dark placed together.  I think white trim-work will brighten the rooms up, and I keep forgetting there is a solarium to go on the ground floor - this house certainly isn't just a box with windows!

I put lighter paper on the kitchen side of the house before he could notice what I was doing, so there will be one bright room here anyway!  I have some hutches I picked up at michaels, i'm hoping that the tops can be removed and used to make overhead cabinets but I haven't sized this up yet.

The second picture is terrible quality, I simply was too lazy to walk across the room to snap it off - the back side of this chimney is an immense blank canvas, I want to imbed something to break up the solid mass of white, I was thinking a large bronze sun, or a clock face - any ideas on this my creative readers?

Glencroft - Day 22

I've been terribly busy with work so the house has gone on the back burner so to speak.  I think I needed a break from it regardless, the interior work was dragging on terribly and after being left alone for a week or so, the house seems to almost be putting itself together!.

Since my last post I have finished wallpapering.  The smaller upstairs room is becoming a study and was papered with fabric swatches.  The larger room has been paneled, papered, and stucco'd using the TP Stucco method.  The bashed window in the now dining room has also been finished.  The leadwork was done with silver jewelers tape and transparency film - with a coat of clear nail polish over the finished product to give a glass look.

I had a bit of difficulty with the roof on this kit, I think that's the one part of every house that causes the most grief.  After several gluings however, it seems to now be sticking.

Tonight I tackled the paperclay exterior.  Riverstone for the chimney and flagstone for the main house structure.  I'll attach pictures but there will be another wash or two of colour to go on before the stone work can be called completed.

I've also hung the front door and started the interior doors.  These are by far the smallest "nails" I have ever encountered.  I got around the size issue by driving pilot holes with finishing nails, and then filling the holes with super glue.  Then I put the tiny nails into the hinge and lowered the hinge/nails into the pilot holes and clamped them in with pliers.  I've been swinging the door all evening and everything seems to be holding so I think this approach will work.

Glencroft - Day 18

Day 18 was a relatively short day focused only on the windows for the dining room.  I managed to get the 5 remaining panes leaded, stained, and sealed.  The leading is done with silver jeweler's tape, the staining with sharpie markers, and sealed with clear nail polish to dissolve the film on the transparency sheets.

Glencroft - Day 17

Happy thanksgiving everyone!  Now that my gut is full of turkey, I figured rather than cleaning up the kitchen I'd put some work into this ever-growing house that is the Glencroft.  I really can't believe how big this house is, and it just seems to be getting more massive daily!

I've been working mostly on the cantilevered window casing for the dining room.  I have the case built and have started on the windows themselves.  I picked up some silver jewelers tape and cut it down to a size which may still be too big, I have to sit on this one window and try to make my decision from there.  The centre window will be open while the other two will be closed.  I'm thinking the upper portions of the window will have some sort of stained glass effect.

I've also papered the upper floors.  I will continue with the paneling on the larger room and stucco on the lower portion of the library room.  The library is "papered" with fabric and mod-podge (matte) so seepage isn't an issue. lol I will never use mod-podge again for hanging paper however, it's only good for fabric.

I've also picked up some fabric bags from the dollar store which will be used to make seat cushions and possibly draping for the lower floors.  That's still up in the air however.

Glencroft - Day 14

Well the move is finally over and the boxes are rapidly approaching "unpacked".  I even have the place to myself tonight so I dove head first into the miniature land and worked on my Glencroft with fervor for the first time in weeks.

I had been debating the idea of making larger, oriel windows in the smaller main floor room of the house because I want to use it as a dining room.  With a sample dining set in there the windows are far too high for the room to function at all in this capacity.  I had been debating building a larger window before I got the kit, and this approach is far out of my comfort zone, but I knew I wouldn't be happy with the finished product if I didn't try.

The trusty dremel eventually made it through the wood and I ripped the window opening on the right hand side down an additional two inches, and thus became committed to figuring out how to build windows from scratch.  Tonight I started building the oriel casement but soon realized that it was a bit much to take on considering I have no idea how to build scratch windows.  Instead I am building a cantilevered window with a tall exterior casing.  I want to add carving detail to the upper "cabinet" of the structure, or possibly just stucco the upper portion and frame it in Jacobean stained wood.

I am happy with the results so far, it's really opened up the room.  I briefly toyed with expanding the front window slot to allow for two smaller windows to be installed to centre them more from the interior.  It may still happen, nothing has been ruled out yet :)


I then wanted to feel like I got something done so I started on the stucco for the outside of the house.  I knew I didn't want to use the spackle and paint method because of the small spaces between the 2nd floor brackets, plus I find the texture is too "big" for this scale I'm working in.  I went with the toilet paper stucco approach and I think it's pretty bang on - not to mention easy!

.